HP StorageWorks X9320 Скачать руководство пользователя страница 139 | Manualshive

Страница: 139 / 152

background image

Declaration of conformity for products marked with the FCC logo, United States only

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device could not cause harmful interference, and (2) this device must accept
any interference received, including interference that could cause undesired operation.
For questions regarding your product, contact:
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 530113
Houston, Texas 77269-2000
Or, call
1-800- 652-6672
For questions regarding this FCC declaration, contact:
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 510101
Houston, Texas 77269-2000
Or, call
(281) 514-3333
To identify this product, refer to the Part, Series, or Model number found on the product.

Modifications

The FCC requires the user to be notified that any changes or modifications made to this device
that are not expressly approved by Hewlett-Packard Company could void the user's authority to
operate the equipment.

Cables

Connections to this device must be made with shielded cables with metallic RFI/EMI connector
hoods in order to maintain compliance with FCC Rules and Regulations.

Laser compliance

This product might be provided with an optical storage device (that is, CD or DVD drive) and/or
fiber optic transceiver. Each of these devices contain a laser that is classified as a Class 1 Laser
Product in accordance with US FDA regulations and the IEC 60826-1. The product does not emit
hazardous laser radiation.

WARNING!

Use of controls or adjustments, or performance of procedures other than those

specified herein, or in the laser product's installation guide, could result in hazardous radiation
exposure. To reduce the risk of exposure to hazardous radiation:

•

Do not try to open the module enclosure. There are no user-serviceable components inside.

•

Do not operate controls, make adjustments, or perform procedures to the laser device, other
than those specified herein.

•

Allow only HP-authorized service technicians to repair the unit.

The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration
implemented regulations for laser products on August 2, 1976. These regulations apply to laser
products manufactured from August 1 1976. Compliance is mandatory for products marketed in
the United States.

Laser compliance

139

«
...
137
138
139
140
141
...
»

Содержание StorageWorks X9320

























































































































































Отзывы:

Нет отзывов

Похожие инструкции для StorageWorks X9320

i-bus KNX IPR/S 3.5.1

Бренд: ABB Страницы: 44

Бренд: Barracuda Networks Страницы: 2

Бренд: Vanguard Страницы: 121

Бренд: H3C Страницы: 21

Бренд: IBA Страницы: 29

Бренд: DPtech Страницы: 39

Бренд: KPN Страницы: 14

MegaRAID SCSI 320-2X

Бренд: LSI Страницы: 4

Surround Dongle

Бренд: Sennheiser Страницы: 18

Бренд: Davey Страницы: 18

Бренд: East Coast Datacom Страницы: 19

JetFusion 2100 Series

Бренд: Paradyne Страницы: 296

Бренд: Tripp Lite Страницы: 2

Бренд: IEI Technology Страницы: 4

Бренд: OneAccess Страницы: 47

Бренд: Abocom Страницы: 1

Бренд: Z-Wave Страницы: 42

Бренд: ZyXEL Communications Страницы: 348

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды