HP ProLiant ML100 G5 Скачать руководство пользователя

Страница: 90 / 111

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit that is different from that to which the receiver is

connected.

•

Consult the dealer or an experienced radio or television technician for help.

•

T (1-800-474-6836). (For continuous quality improvement, calls may be recorded

or monitored.)

laration, contact us by mail or telephone:

•

510101

269-2000

To identify this product, refer to the part, series, or model number found on the product.

are

approved by Hewlett-Packard Company may void the user’s authority to operate the

equipment.

ith metallic RFI/EMI connector hoods in

order to maintain compliance with FCC Rules and Regulations.

Declaration of conformity for products marked with
the FCC logo, United States only

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.
For questions regarding this product, contact us by mail or telephone:

•

Hewlett-Packard Company
P. O. Box 692000, Mail Stop 530113

Houston, Texas 77269-2000

1-800-HP-INVEN

For questions regarding this FCC dec

Hewlett-Packard Company
P. O. Box 692000, Mail Stop

Houston, Texas 77

•

281-514-3333

Modifications

The FCC requires the user to be notified that any changes or modifications made to this device that

not expressly

Cables

Connections to this device must be made with shielded cables w

Regulatory compliance notices 90

Содержание ProLiant ML100 G5
















































































































Результаты поиска

Содержание ProLiant ML100 G5

Отзывы:

Похожие инструкции для ProLiant ML100 G5

Бренды по названию

Популярные бренды

HP ProLiant ML100 G5, Руководство пользователя

Результаты поиска

Содержание ProLiant ML100 G5

Отзывы:

Похожие инструкции для ProLiant ML100 G5

Бренды по названию

Популярные бренды