HP ProLiant ML100 G5 Скачать руководство пользователя

Страница: 44 / 111

Installing the embedded SATA RAID driver

nables RAID

Requi

r requires a diskette drive or a CD-ROM drive.

rd hardware.

Diskette and CD-ROM drive options

, contact an HP authorized reseller.

•

-5868.

HP Integrated Lights-Out Virtual Floppy and CD-ROM drives

OM drive functionality through the LO100i Virtual

Floppy and CD-ROM features.

er to the HP Integrated Lights-Out User Guide on the

e (http://www.hp.com/servers/lights-out).

USB diskette and CD-R

For river

e are sufficient, unless

otherwise indicated in driver-specific documentation.

HP provides the SATA RAID feature through use of the HP Storage Manager. This feature e
functionality (RAID 0 or RAID 1) for the embedded SATA controller in the system.

red hardware

Installing the Embedded SATA RAID drive
In a Microsoft® Windows® OS environment, driver installation is supported only with a USB diskette

drive , LO100i Virtual Floppy, or Virtual Floppy with the embedded SATA RAID Windows® driver.
Some servers do not ship with these drives as standa

quire a diskette drive option or CD-ROM drive option for a server

For the name of the nearest HP authorized reseller:

In the United States, call 1-800-345-1518.

•

In Canada, call 1-800-263

•

In other locations, refer to the HP website (http://www.hp.com).

LO100i Advanced provides diskette drive and CD-R

For detailed information about LO100i Advanced, ref
HP websit

OM drives

installation purposes, a USB diskette drive and USB CD-ROM driv

NOTE:

Do not use a USB drive key in place of the diskette drive. The OS does not support

driver installation from a USB drive key.

NOTE:

HP recommends the use of HP standard USB disk drives.

HP rovides

both standard USB 2.0 support and legacy USB 2.0 support. Standard support is provided

rough the appropriate USB device drivers. Before the OS loads, HP provides support for USB

vic

acy USB support, which is enabled by default in the system ROM.

support provides USB functionality in environments where USB support is not available

ing:

•

POST

•

RBSU

by e OS th
de es through leg
Leg cy USB

normally. Specifically, HP provides legacy USB functionality for the follow

Software and configuration utilities 44

Содержание ProLiant ML100 G5
















































































































Результаты поиска

Содержание ProLiant ML100 G5

Отзывы:

Похожие инструкции для ProLiant ML100 G5

Бренды по названию

Популярные бренды

HP ProLiant ML100 G5, Руководство пользователя

Результаты поиска

Содержание ProLiant ML100 G5

Отзывы:

Похожие инструкции для ProLiant ML100 G5

Бренды по названию

Популярные бренды