manualshive.com logo in svg

HP ProLiant DL585, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP ProLiant DL585 Скачать руководство пользователя страница 99

Troubleshooting 

Table 5-2:  Is the System Power LED Off? 

continued

 

Answer Possible 

Reasons Possible 

Solutions 

No 

 

If the system power button LED is amber, press the Power 
On/Standby button.  

Refer to Table 5-3. 

Note:  For LED locations and functions, refer to Chapter 4, “Server Component Identification.” 

 

Table 5-3:  Is the System Power LED Green? 

Answer Possible 

Reasons Possible 

Solutions 

Power On/Standby button has not been pressed 
firmly. 

Firmly press the power button. 

A power supply problem exists. The power 
supply may not be connected or inserted 
properly, it may have a damaged connector, or it 
may have failed. 

Be sure that the power supply is undamaged, the 
power supply is fully seated, and the power supply 
LED is green. 

The system may have experienced a short. 

Check for bent connector pins and improperly seated 
expansion boards. 

The front panel LED assembly has failed. 

Be sure that the front panel LED assembly cable is 
connected to the power backplane. 

No, it is 
off 

 

If these solutions do not solve the problem, contact 
an authorized service provider for assistance. 

Yes 

 

If the system power button LED is green, refer to 
Table 5-4. 

Note:  For LED locations and functions, refer to Chapter 4, “Server Component Identification.”  

 

Table 5-4:  Is the External Health LED Green? 

Answer Possible 

Reasons Possible 

Solutions 

No, it is amber 

One power supply has failed; 
therefore, power supply 
redundancy is lost. 

Be sure that each installed power supply is securely connected 
to an AC power source. 

Locate the amber power supply LED to identify the failed power 
supply. 

Contact an authorized service provider for replacement parts 
and service. 

No, it is red 

All installed power supplies 
have experienced a failure. 

Remove all AC power from power supplies and reconnect to 
clear the error condition. 

Replace the power supply. Contact an authorized service 
provider for replacement parts and service. 

Yes 

 

Refer to Table 5-5 if the external health LED is green. 

Note:  For LED locations and functions, refer to Chapter 4, “Server Component Identification.”  

HP ProLiant DL585 Server Maintenance and Service Guide 

5-5 

  

 

  

 

Содержание ProLiant DL585

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды