HP ProLiant DL585 Скачать руководство пользователя страница 64

Страница: 64 / 112

Removal and Replacement Procedures

System Board

To remove the system board:

1. Power down the server. Refer to “Powering Down the Server” ea rlier in this chapter.

2. Remove all power supplies. Refer to “Hot -Plug Power Supply” earlier in this ch apter.

3. Remove all the hot-plug SCSI hard drives. Refer to “Hot-Plug SC SI Hard Drives” earlier

in this chapter.

NOTE: Label the individual hard drives before pulling them out.

4. Extend the server from the rack. Refer to “Extending the Server from the Rack” earlier in

this chapter. Although not required, HP recommends removing the server from the rack
for best performance. See “Removing the Server from the Rack” ea rlier in this chapter.

5. Remove the access panel. Refer to “R emoving the Access Panel” earlier in this chapter.

6. Remove the processor memory boards. Refer to “Proce ssor Memory Boards” earli er in

this chapter.

7. Remove the SCSI cables. Refer to “SCSI Cables” earlier in this chapter.

8. Remove the PCI-X expansion boards. Refer to “PCI -X Expansion Boards” earli er in this

chapter.

9. Remove the front fan cage. Refer to “F ront Fan Cage” earlier in this chapter.

10. Remove the rear fan cage. Refer to “R ear Fan Cage” earlier in this chapter.

11. Remove the pass-through board. Refer to “P ass-Through Board” earlier in this ch apter.

12. Remove the SCSI backplane. Refer to “ SCSI Backplane” ea rlier in this chapter.

13. Remove the BBWC assembly. Refer to “B attery-Backed Write Cache Assembly” earlier

in this chapter.

HP ProLiant DL585 Server Maintenance and Service Guide

2-43

Содержание ProLiant DL585

















































































































Результаты поиска

Содержание ProLiant DL585

Отзывы:

Бренды по названию

Популярные бренды

HP ProLiant DL585, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProLiant DL585

Отзывы:

Бренды по названию

Популярные бренды