manualshive.com logo in svg

HP ProLiant DL585, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP ProLiant DL585 Скачать руководство пользователя страница 98

Troubleshooting 

Diagnostic Steps 

If the server does not power up, or powers up but does not complete POST, answer the 
questions in Table 5-1 to determine appropriate actions based on the symptoms observed. The 
flow of questions reflects the usual flow of events during a power-on sequence. A flow chart 
following this table illustrates the recommended diagnostic steps and decision options. 

According to the answers you give, you will be directed to an appropriate secondary table in 
this section. The table outlines possible reasons for the problem, options available to assist in 
diagnosis, possible solutions, and references to other sources of information. 
 

Table 5-1:  Diagnostic Steps 

Question Action 

Question 1: 

Is the system power LED off? 

If no, continue to question 2. 

If yes, refer to Table 5-2. 

Question 2: 

Is the system power LED green? 

If yes, continue to question 3. 

If no, refer to Table 5-3. 

Question 3: 

Is the external health LED green? 

If yes, continue to question 4. 

If no, refer to Table 5-4. 

Question 4: 

Is the internal health LED green? 

If yes, continue to question 5. 

If no, refer to Table 5-5. 

Question 5: 

Is the monitor displaying information? 

If yes, use the POST messages for further diagnosis. 
Refer to Table 5-6 for details. 

If no, refer to Table 5-6. 

 

Table 5-2:  Is the System Power LED Off? 

Answer Possible 

Reasons Possible 

Solutions 

The system is not connected to AC 
power, or no AC power is available. 

A power supply problem exists. The 
power supply may not be connected or 
inserted properly, it may have a 
damaged connector, or it may have 
failed. 

Be sure that the power cord is connected to the power 
supply. 

Be sure that the power supply is undamaged and fully 
seated, and then verify that the power supply LED is green 
when you power up the server. Refer to Chapter 4, “Server 
Component Identification,” for locations and states. 

A broken connection exists between the 
front panel LED assembly and the 
removable media board. 

Be sure that the power switch cable assembly is inserted 
properly to the removable media board. 

 

Yes, it is 
off 

The front panel LED assembly has 
failed. 

Refer to the HP Servers Troubleshooting Guide for further 
options. 

If these solutions do not solve the problem, contact an 
authorized service provider for assistance. 

continued 

5-4 

HP ProLiant DL585 Server Maintenance and Service Guide 

  

 

  

 

Содержание ProLiant DL585

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды