manualshive.com logo in svg

HP ProLiant DL585, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP ProLiant DL585 Скачать руководство пользователя страница 62

Removal and Replacement Procedures 

System Battery 

 

 

WARNING:  This server contains an internal lithium manganese dioxide or vanadium 
pentoxide battery. A risk of fire and burns exists if the battery is not handled properly. 
To reduce the risk of personal injury: 

• 

Do not attempt to recharge the battery. 

• 

Do not expose to temperatures higher than 60

°

C (140

°

F). 

• 

Do not disassemble, crush, puncture, short external contacts, or dispose of in fire 
or water. 

• 

Replace only with the HP spare designated for this server. 

 

 

CAUTION:  Do not dispose of batteries, battery packs, and accumulators with the 
general household waste. To forward them to recycling or proper disposal, use the 
public collection system or return them to either HP or an authorized service provider. 

To remove the battery: 

1.  Power down the server. Refer to “Powering  Down the Server” ea rlier in this chapter. 

2.  Extend the server from the rack. Refer to “Extending the Server from the Rack”  earlier in 

this chapter. 

3.  Remove the access panel. Refer to “R emoving the Access Panel”  earlier in this chapter. 

4.  Locate the battery on the system board. 

 

NOTE:  It may be necessary to remove some PCI-X expansion boards to gain access to the battery. 

 

Figure 2-35:  Locating the battery on the system board 

HP ProLiant DL585 Server Maintenance and Service Guide 

2-41 

  

 

  

 

Содержание ProLiant DL585

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды