manualshive.com logo in svg

HP ProLiant DL585, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP ProLiant DL585 Скачать руководство пользователя страница 100

Troubleshooting 

 

Table 5-5:  Is the Internal Health LED Green? 

Answer Possible 

Reasons Possible 

Solutions 

For component failure identification (amber LED), check the hood label. 

No, it is amber 

A processor is in pre-failure condition. 

A DIMM is in pre-failure condition. 

One memory bank is valid, but another bank 
is missing a DIMM. 

One memory bank is valid, but another bank 
has mismatched DIMMs installed. 

One memory bank is valid, but another bank 
has an unsupported DIMM type installed. 

A redundant fan has failed. 

Use internal component failure LEDs to identify: 

• 

Missing components 

• 

Degraded components 

• 

Failed components 

• 

Improperly installed components 

Replace any missing components, reseat all 
components, and restart the system. 

If LED failure indicator reappears, replace the 
failing component. For more troubleshooting 
information, refer to the HP Servers 
Troubleshooting Guide. 

For component replacement procedures, refer to 
the HP ProLiant DL585 Servers Maintenance and 
Service Guide at 

www.hp.com/support

 

Contact an authorized service provider for 
replacement parts and service. 

No, it is red 

A processor has failed. 

Processor 1 is not installed. 

A processor is an unsupported type. 

Processor does not have an associated 
PPM installed. 

A PPM has failed. 

A DIMM has experienced a multibit error. 

DIMM pairs have mismatched DIMMs. 

DIMMs are missing. 

DIMMs are an unsupported type. 

A required fan has failed. 

A thermal event has occurred. 

Use internal component failure LEDs to identify: 

• 

Missing components 

• 

Failed components 

• 

Improperly installed components 

• 

Thermal event 

Replace any missing components, reseat all 
components, and restart the system.  

If LED failure indicator reappears, replace the 
failing component. For more troubleshooting 
information, refer to the HP Servers 
Troubleshooting Guide. 

For component replacement procedures, refer to 
the HP ProLiant DL585 Servers Maintenance and 
Service Guide at 

www.hp.com/support

 

Contact an authorized service provider for 
replacement parts and service. 

 

 

A component is not properly seated. 

Check the interlock LEDs on top of the front 
access panel. Be sure that all components are 
seated securely. 

continued 

5-6 

HP ProLiant DL585 Server Maintenance and Service Guide 

  

 

  

 

Содержание ProLiant DL585

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды