HP ProLiant DL380p Gen8 Скачать руководство пользователя | Manualshive

Страница: 109 / 133

background image

Software and configuration utilities 109

IMPORTANT:

Always perform a backup before installing or updating device drivers.

The server includes new hardware that may not have driver support on all OS installation media.
If you are installing an Intelligent Provisioning-supported OS, use Intelligent Provisioning (on page

101

) and

its Configure and Install feature to install the OS and latest supported drivers.
If you do not use Intelligent Provisioning to install an OS, drivers for some of the new hardware are required.

These drivers, as well as other option drivers, ROM images, and value-add software can be downloaded as
part of an SPP.
If you are installing drivers from SPP, be sure that you are using the latest SPP version that your server

supports. To verify that your server is using the latest supported version and for more information about SPP,

see the HP website (

http://www.hp.com/go/spp/download

).

To locate the drivers for a particular server, go to the HP website (

http://www.hp.com/go/hpsc

) and click

on

Drivers, Software & Firmware

. Then, enter your product name in the

Find an HP product

field and click

Go

.

Software and firmware

Software and firmware should be updated before using the server for the first time, unless any installed

software or components require an older version. For system software and firmware updates, download the

SPP ("

HP Service Pack for ProLiant

" on page

103

) from the HP website (

http://www.hp.com/go/spp

).

Version control

The VCRM and VCA are web-enabled Insight Management Agents tools that HP SIM uses to schedule

software update tasks to the entire enterprise.

•

VCRM manages the repository for SPP. Administrators can view the SPP contents or configure VCRM to

automatically update the repository with internet downloads of the latest software and firmware from
HP.

•

VCA compares installed software versions on the node with updates available in the VCRM managed
repository. Administrators configure VCA to point to a repository managed by VCRM.

For more information about version control tools, see the

HP Systems Insight Manager User Guide,

the

HP

Version Control Agent User Guide

, and the

HP Version Control Repository User Guide

on the HP website

(

http://www.hp.com/go/hpsim

).

HP operating systems and virtualization software support for
ProLiant servers

For information about specific versions of a supported operating system, see the HP website

(

http://www.hp.com/go/ossupport

).

«
...
107
108
109
110
111
...
»

Содержание ProLiant DL380p Gen8






































































































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant DL380p Gen8

Бренд: LaCie Страницы: 4

BACnet/IP Server-SUNWAYS

Бренд: IntesisBox Страницы: 5

Anybus Communicator ABC4018

Бренд: HMS Networks Страницы: 64

Бренд: NASdeluxe Страницы: 6

Бренд: Digi Страницы: 118

1870N - HL B/W Laser Printer

Бренд: Brother Страницы: 204

Бренд: QNAP Страницы: 49

Бренд: EVS Страницы: 87

Бренд: Bosanova Страницы: 2

Бренд: Bosanova Страницы: 2

Бренд: Bosanova Страницы: 2

Бренд: Gigabyte Страницы: 143

IMS LANTIME M3000

Бренд: Meinberg Страницы: 139

Бренд: 360 Systems Страницы: 148

Бренд: Intel Страницы: 67

X38ML - Server Board Motherboard

Бренд: Intel Страницы: 132

Бренд: Qsan Страницы: 65

Power System IC922

Бренд: IBM Страницы: 146

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды