HP ProCurve Radio Port 210, Руководство по установке и началу работы

Страница: 15 / 36

2-5
Installation Instructions
Wall Mount
In
sta
lla
tio
n
In
str
u
c
tio
n
s
6. Plug the Ethernet cable to the RJ-45 port and connect the opposite end of
the cable to a switch with an IEEE 802.3af compatible power source. The
Ethernet cable can be tucked inside the cable recess on the underside of
the radio port case for a completely clean installation. (See following
diagram)
7. Place the middle of each of the case's mounting slots over the mounting
screw heads.
8. Slide the case down along the mounting surface to hang the mounting
slots on the mounting screws.
9. Verify the radio port has power by observing that the LEDs are lit or
flashing.
Safety Wire Tie Point
RJ-45 Port
Lock Port
Cable
recess