HP ProCurve Radio Port 210, Руководство по установке и началу работы

Страница: 11 / 36

2
In
sta
lla
tio
n
In
str
u
c
tio
n
s
2-1
Installation Instructions
The ProCurve Radio Port 230 and 210 can be mounted either on a wall or on
a suspended ceiling T-bar. The radio ports are not designed for mounting on
a desk. The diagrams on the next page note the key installation features.
To prepare for installation, perform the following steps:
1. Match the model number on the purchase order with the model numbers
in the packing list and on the case of the shipped device.
2. Verify that the contents of the box include the intended ProCurve Radio
Port 230 or 210 and mounting hardware:
3. Review site survey and network analysis reports to determine the location
and mounting positions for the ProCurve Radio Port 230 and 210.
4. Connect a CAT-5 cable to a compatible IEEE 802.3af power source and
run the cable to the installation site. Ensure that there is sufficient slack
on the cable to perform the installation steps.
Radio Port Item Notes
230 J9006A 802.11a & 802.11b/g integrated antenna
configuration.
210 J9004A 802.11b/g integrated antenna configuration.
Wall Mount Slot
T-Bar Suspension Clips
See Detail Below
T-Bar Retaining Clip