HP ProCurve Radio Port 210, Руководство по установке и началу работы

Страница: 8 / 36

1-4
Introduction
Radio Characteristics
In
tr
o
d
u
c
ti
o
n
Radio Characteristics
The ProCurve Radio Port 230 comprises two IEEE 802.11 radios: (1) an IEEE
802.11 b/g radio operating in the 2.41 to 2.8 GHz band and (2) an IEEE 802.11a
radio operating in the 5.15 to 5.88 GHz band. The ProCurve Radio Port 210 has
a single IEEE 802.11b/g radio. Both units contain two embedded 2.41-2.8 GHz
omni-directional diversity antennas and the Radio Port 230 also contains two
embedded 5.1-5.88 GHz omni-directional diversity antennas.
The following table lists the IEEE 802.11-compliant operating modes. The
three supported IEEE 802.11g modes are simultaneous CCK and OFDM, CCK
only, or OFDM only.
For details on Transmit Power and Receiver Sensitivity values, reference the
Product Data Sheets located on the ProCurve Web site,
www.procurve.com .
Integrated RJ-45 Port
Each radio port has one RJ-45 connector supporting a full-duplex 10/100Base-
TX Ethernet port, and requires IEEE 802.3af-compliant Power over Ethernet
(PoE) from an external source, such as a PoE switch or power injector. This
Ethernet port is configured as an MDI port and can be connected to any MDIX
switch port using standard straight-through CAT-5 Ethernet cables. For details
on cable pinouts, see the
Installation and Getting Started Guide for your
ProCurve switch.
A single CAT-5 cable is used to supply both Ethernet connectivity and power
to the radio port allowing these radio ports to be installed up to 100 m (300
ft.) from a PoE-compliant 10/100Base-TX Ethernet port. There is no additional
power supply required.
Device Mbps Data Rate Support Utilizing
Diversity GHz
802.11a 6, 9, 12, 18, 24, 36, 48, 54
OFDM Transmit and
receive 5.1 to 5.88 range
802.11b/g 1, 2, 5.5, 11 CCK
6, 9, 12, 18, 24, 36, 48, 54
OFDM Transmit and
receive 2.41 to 2.8 range