manualshive.com logo in svg

HP ProBook 6450b, Руководство пользователя, Страница: 45 / 181

Поделиться
Скачать
HP ProBook 6450b Скачать руководство пользователя страница 45

Using the modem (select models only)

The modem must be connected to an analog telephone line using a 6-pin, RJ-11 modem cable
(purchased separately). In some countries or regions, a country- or region-specific modem cable adapter
(purchased separately) is also required. Jacks for digital PBX systems may resemble analog telephone
jacks, but they are not compatible with the modem.

WARNING!

Connecting the internal analog modem to a digital line can permanently damage the

modem. Immediately disconnect the modem cable if you accidentally connect it to a digital line.

If the modem cable contains noise suppression circuitry 

(1)

, which prevents interference from TV and

radio reception, orient the circuitry end 

(2)

 of the cable toward the computer.

Connecting a modem cable

WARNING!

To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a modem

cable (purchased separately) or telephone cable into the RJ-45 (network) jack.

To connect a modem cable:

1.

Plug the modem cable into the modem jack 

(1)

 on the computer.

2.

Plug the modem cable into the RJ-11 telephone wall jack 

(2)

.

Using the modem (select models only)

35

Содержание ProBook 6450b






















































































































































































Отзывы:

Нет отзывов