HP ProBook 6450b Скачать руководство пользователя страница 28

Страница: 28 / 181

Wireless antennas (select models only)

NOTE:

Your computer may look slightly different from the illustration in this section.

Component

Description

(1)

WWAN antennas (2)*

Send and receive wireless signals to communicate with wireless
wide-area networks (WWAN).

(2)

WLAN antennas (2)*

Send and receive wireless signals to communicate with wireless
local area networks (WLAN).

*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around
the antennas free from obstructions.

To see wireless regulatory notices, refer to the section of the

Regulatory, Safety and Environmental

Notices

that applies to your country or region. These notices are located in Help and Support.

Chapter 1 Features

Содержание ProBook 6450b






















































































































































































Результаты поиска

Содержание ProBook 6450b

Отзывы:

HP ProBook 6450b, Руководство пользователя, Страница: 28 / 181

Результаты поиска

Содержание ProBook 6450b

Отзывы: