8
Figure 8
Connecting the network cable
7.
Align the installation hole in the rear of the switch with the standout on the mounting bracket.
8.
Push the HP NJ5000-5G-PoE+ onto the mounting bracket, and then slide it down until it is fully
engaged. Then secure the switch to the bracket by using the Phillips-head screws or security-head
security Torx-10 screws. Do not release the HP NJ5000-5G-PoE+ until you confirm that it is secured
in place.
Figure 9
Securing the HP NJ5000-5G-PoE+
1
2
