18
Ports
•
Four Gigabit Ethernet LAN ports
—
Auto-sensing 1000BASE-T Ethernet ports with RJ-45
connectors. Two ports provide IEEE 802.3af or 802.3at power over Ethernet (PoE) to supply power
to PD devices.
•
One Gigabit Ethernet uplink port
—
An auto-sensing 1000BASE-T Ethernet port with an
RJ-45 connector.
•
One console port
—
For HP-directed debugging and customizing. The console port is located at
the back of the unit.
Reset button
The reset button is accessible through a hole on the side panel of the HP NJ5000-5G-PoE+.
To reboot the HP NJ5000-5G-PoE+:
1.
Insert a paper clip into the reset button hole.
2.
Press and hold the button for less than 5 seconds.
3.
Release the button.
To reset the HP NJ5000-5G-PoE+ to factory defaults:
1.
Insert a paper clip into the reset button hole.
