6
Figure 5
Securing the HP NJ5000-5G-PoE+
Installing the switch on a wall
Before installing the HP NJ5000-5G-PoE+ on a wall, make sure the surface of the wall can support a
minimum weight of 0.9 kg (2 lbs) and extra cables.
1.
Hold the optional unified wired WLAN walljack table/flush wall mount panel in a vertical
orientation against the wall where it will be installed. Mark two holes for the screws or
user-supplied wall anchors.
2.
Use the two supplied screws or user-supplied wall anchors to loosely attach the mount panel to the
wall. If using wall anchors, drill two holes, typically 4.7 mm (0.19 in) in diameter, and then insert
the anchors.
1
2
