HP NetServer e 800, Руководство по обслуживанию

Страница: 90 / 103

Chapter 6 Replacing Parts
84
Replacing the Processor
1. Ensure the processor speed of the second processor (CPU 2) is the same as the existing
processor before installing the second processor.
NOTE If you are upgrading the second processor to a faster processor speed than the
primary processor, the primary processor must also be changed. Both processors
must have the same product number, which includes the same clock speed, cache
size, and FSB speed.
The supported processors only perform at the rated speed indicated on the
processor in the HP NetServer.
2. Open the ZIF (Zero Insertion Force) lever to allow removal of the terminator installed in the
processor socket.
You need to pull the lever out away from the ZIF socket and then raise it to a full 90
°
to the
system board.
ZIF
Lever
Processor Socket
Terminator
NOTE Retain the terminator for future use. The NetServer will not operate properly if using
only one processor with no terminator installed.
3. Lift the terminator out of the socket and place it on anti-static surface or container.
4. Align the second processor over the empty processor socket.