HP NetServer e 800, Руководство по обслуживанию

Страница: 40 / 103

Chapter 4 Diagnostics
34
Code Description Problem/Solution
0100 Keyboard error during POST A key on the keyboard has been pressed during POST of the
HP NetServer.
To correct this:
1. Ensure nothing is placed on the keyboard and no key
is accidentally pressed down.
2. Reboot the NetServer.
3. If the error persists, your keyboard may need to be
replaced. Contact your service representative.
0101 Keyboard error The keyboard has reported an error during its self-test.
To correct this:
1. Restart your HP NetServer.
2. If the error persists, your keyboard may need to be
replaced. Contact your service representative.
0102 Keyboard controller error POST has detected a general failure in the integrated
keyboard controller.
To verify this error:
1. Restart your HP NetServer.
2. If the error persists, your system board may need to
be replaced. Contact your service representative.
0103 Keyboard is not connected. POST has detected the keyboard is not connected.
To correct this:
1. Verify the keyboard connector is firmly connected.
2. Reboot the NetServer.
3. If the problem persists, your keyboard cable may be
damaged or your keyboard may need to be replaced.
Contact your service representative.
0105 Mouse boot error The system board has detected a mouse error during POST.
To correct this:
1. Clean the mouse and its moving ball as described in
the User's Guide.
2. If the problem persists, your mouse may need to be
replaced. Contact your service representative.
0106 Mouse is not responding. The system board has detected the mouse is not responding.
To correct this:
1. If the mouse has just been removed, press <Esc > to