HP NAS 4000s, Руководство администратора

Страница: 44 / 246

Basic Administrative Procedures and Setup Completion
44 NAS 4000s and 9000s Administration Guide
6. Click OK in the HP Network Teaming and Configuration Properties Screen to apply the
changes.
7. Click Yes when prompted to apply all configuration changes. Wait while the adapters are
configured. This process could take several seconds.
8. The following screen is displayed, indicating that there are additional procedures to
perform in the NIC teaming process. Click Yes to reboot now.
Figure 19: HP Network Teaming dialog box
Configuring the NIC Team Properties
At this point, the NICs are teamed but are not completely configured. Additional procedures
include:
■
Renaming the teamed connection
■
Selecting the option to show an icon on the taskbar
■
Configuring TCP/IP on the new team
Renaming the Teamed Connection
The assigned name for the new NIC team connection is “Local Area Connection X,” where X
represents the next available connection number generated by the system. HP recommends
changing this name to a more meaningful name, such as “NIC Team.”
To change the name of the connection:
1. From the desktop, right-click the My Network Places icon, then click Properties. The
Network and Dial up Connections screen is displayed.
2. Move the cursor over each connection icon to view the pop up box of the icon's name.
Locate HP Network Teaming Virtual Miniport.
3. Right-click the connection icon for HP Network Teaming Virtual Miniport, and select
Rename. Enter a name that is more descriptive than “Local Area Connection X,” such as
“NIC Team.”