English
9
HP Kayak XU 03xx PC Workstation — Installing Accessories In Your HP PC Workstation
Installing Memory
8
The location of the memory module slots is shown here.
9
Slide the memory module into the slot at 90° to the system board
(with the cutouts furthest away from the processor).
10
Firmly
press the memory module
completely
into the connector
until the retaining clips click into position. Repeat this procedure for
each additional memory module you want to install.
11
Install any other accessories if necessary, then replace all units and
reconnect all cables and power cords. Replace the cover (refer to
page 4).
12
Check the HP Summary Screen to verify the new configuration.
Slide the memory module into the
slot at 90
o
to the system board
Push the module until the
retaining clips click into position
Memory module
cutouts
03xx-i~1.fm Page 9 Tuesday, February 16, 1999 10:15 AM
