English
27
HP Kayak XU 03xx PC Workstation — Installing Accessories In Your HP PC Workstation
Installing Accessory Boards
7
Secure the board by replacing the slot cover screw.
If you loosened the screws on adjacent slots, remember to tighten
them.
8
Install any other accessories before replacing the cover (refer to
page 4). Reconnect all cables and power cords.
Completing the
Installation of an ISA
Accessory Board
If you have installed an ISA accessory board that uses any interrupt,
you must run the
Setup
program and reserve the IRQ for the
accessory board. This allows PCI devices to be automatically
configured.
1
Turn on the PC Workstation and press
when
Setup
appears.
2
In the
Setup
program, select the Advanced menu and the PCI Slot
Configuration submenu. A list of IRQs and the devices that use them
are displayed. Highlight the IRQ field you want to change, for
example
IRQ 11
.
3
You can use the space bar or press
or
to make the IRQ
available for PCI (
Available
) or make it unavailable for PCI
(
Reserved
).
4
Press
to save any changes you made and exit the
Setup
program.
NOTE
You should always leave at least one IRQ available for use by the
integrated PCI devices.
Secure the board
in position
03xx-i~1.fm Page 27 Tuesday, February 16, 1999 10:15 AM
