manualshive.com logo in svg

HP J6039C - JetDirect 200M Print Server, Руководство пользователя, Страница: 163 / 181

Поделиться
Скачать
HP J6039C - JetDirect 200M Print Server Скачать руководство пользователя страница 163

16 HP Jetdirect Configuration Page 

ENWW

CONFIG FILE:

The name of the HP Jetdirect configuration file. The file 
pathname may be truncated to fit on two lines.

NOT SPECIFIED indicates that a file was not specified in 
the BOOTP reply from the host.

DOMAIN NAME:

The Domain Name System (DNS) name of the domain in 
which the HP Jetdirect print server resides (for example, 
support.company.com). It is not the fully qualified DNS 
name (for example, printer1.support.company.com) 
because the host printer name is not included. 

NOT SPECIFIED indicates that a domain name has not 
been configured on the print server.

DNS  SERVER:

The IP address of the Domain Name System (DNS) server.

NOT SPECIFIED indicates that a DNS server’s IP address 
has not been configured on the print server.

WINS SERVER:

The IP address of the Windows Internet Name Service 
(WINS) server.

NOT SPECIFIED indicates that a WINS server’s IP 
address has not been configured on the print server.

SYSLOG SERVER:

The IP address of the syslog server configured on the 
print server. 

NOT SPECIFIED indicates that a syslog server has not 
been configured.

IDLE TIMEOUT:

The timeout value expressed in seconds after which the 
print server closes an idle TCP print data connection. 
Acceptable values are integers between 0 and 3600. A 
value of zero turns off the timeout mechanism. The default 
value is 270 seconds.

SLP:

Specifies whether the HP Jetdirect print server sends 
Service Location Protocol (SLP) packets used by system 
applications for automated installation.

ENABLED: The print server sends SLP packets.

DISABLED: The print server does not send SLP packets.

WEB JETADMIN URL:

If the HP Jetdirect print server is found on the network by 
HP Web JetAdmin, the URL of the host system used for 
HP Web JetAdmin services is displayed. The URL is 
limited to two lines and may be truncated.

NOT SPECIFIED indicates that the URL of the Web 
JetAdmin host system could not be identified or is 
not configured.

Table 9.6

TCP/IP Configuration Information (3 of 3)

Message

Description

Содержание J6039C - JetDirect 200M Print Server






















































































































































































Отзывы:

Нет отзывов