HP HPE StoreOnce 3100 Series Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 75

background image

5.

After the firmware has updated, HPE recommends a cold reboot as follows:

•

Power down the node(s) using the StoreOnce CLI command:

system shutdown

•

After the system has completely shut down, wait at least one minute before powering
on using the Power On button on the server(s).

NOTE:

A cold reboot is required if the network card or storage controller card firmware

has been updated. For other components, it is acceptable to reboot the system using the
StoreOnce CLI command:

system reboot

Upgrading StoreOnce software

To establish which StoreOnce software version is installed, click on

StoreOnce

in the Navigator

and look at the

Software Revision

under System Information.

Check HPE Support to find out if a later software release is available at

www.hpe.com/support/

softwaredepot

. If it is, download the software release and follow the instructions in the

accompanying Release Notes to install the software.

Running a system self test

The StoreOnce CLI command,

system confidencecheck

, runs a self-test on the system and

produces a report of any problems. It is good practice to run this command before and after
maintenance activities. Refer to the HPE StoreOnce System CLI Reference Guide for more
information about using this command.

system/confidencechecker# runtest all

Confidence checks running. Checks will take maximum of 60 seconds. Please wait...

###############################################################################
# #
# CONFIDENCE REPORT #
# #
###############################################################################

Report Date: Wed Nov 18 11:55:40 UTC 2015
Product ID: HPE StoreOnce 3540 System
Cluster S/N: XXXXXNNNNNNXX
Version: 3.14.0-1539.3
Test Type: all

### FILE SYSTEM REPORT ########################################################

File System Check:
[RESULT]
PASSED

### INTERNAL NETWORK REPORT ###################################################

Internal Network Check is supported only on HP StoreOnce multinode products.

### EXTERNAL NETWORK REPORT ###################################################

External Network Check:
[RESULT]
PASSED

### SAS CONFIGURATION REPORT ##################################################

Sas Configuration Check is supported only on HP StoreOnce multinode, 5500 and 4900 backup products.

### NOTE ######################################################################

For any warning or error messages in this report, please consult the troubleshooting
section in the customer user guide and follow the steps to perform corrective action.

32

Power on/off, firmware upgrades and other processes

«
...
30
31
32
33
34
...
»

Содержание HPE StoreOnce 3100 Series












































































Отзывы:

Нет отзывов

Похожие инструкции для HPE StoreOnce 3100 Series

DSN-4100 Series

Бренд: D-Link Страницы: 2

LaCie Ethernet Big Disk

Бренд: LaCie Страницы: 16

4BIG QUADRA USB 3.0

Бренд: LaCie Страницы: 41

5big - Network NAS Server

Бренд: LaCie Страницы: 9

Бренд: LaCie Страницы: 14

Бренд: LaCie Страницы: 13

Бренд: LaCie Страницы: 29

Бренд: LaCie Страницы: 4

XCubeSAN XS5224D

Бренд: Qsan Technology Страницы: 143

4big Spare Drive

Бренд: LaCie Страницы: 24

Бренд: Palram Страницы: 123

MOBILERAID MR5S1

Бренд: Sans Digital Страницы: 1

Terascale ST4000NC000

Бренд: Seagate Страницы: 37

Бренд: QNAP Страницы: 74

Бренд: StorCentric Страницы: 53

Бренд: IBM Страницы: 295

Бренд: Compaq Страницы: 157

Бренд: Premio Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды