HP HPE 3PAR StoreServ 8000, Руководство по установке

Страница: 134 / 152

◦
Number of drive cages
◦
Number of drive magazines —
showcage –d
◦
Number and sizes of drives on the magazines —
showpd
•
Physical condition of system hardware and cabinet (note presence of scratches, dents,
missing screws, broken bezels, damaged ports, and other visible anomalies)
•
Destination address or addresses and list of the equipment going to each address
NOTE: In this and other chapters, the command-line examples use bold type to indicate user
input and angle bracket (< >) to denote variables. Examples may not match the exact output any
particular system.
Uninstalling the System
NOTE: If you are planning to reinstall using the existing license, record the license before
completing this uninstall procedure. Use the following commands to record the existing license:
showlicense
and
showlicense -raw
.
This section provides instructions for uninstalling a system.
1.
Connect the laptop to the highest numbered controller node with a serial cable.
2. Using a terminal emulator program, such as Putty, set your maintenance laptop console to
the following settings.
Value Setting
57600 Baud rate
8 Data bits
None Parity
1 Stop bits
Xon/Xoff Flow control
3. Log into the node as the
console
user.
3PAR(TM) OS <version> <sernum>-<nodeID> ttyS0
(none) login:
console
Password:
<password>
NOTE: To cancel the process at anytime, press CTRL+C .
4. From the console menu, enter
8
to select Perform a deinstallation .
3PAR Console Menu 1400293-1 3.x.x.xxx
1. Out Of The Box Procedure
2. Re-enter network configuration
3. Update the CBIOS
4. Enable or disable CLI error injections
5. Perform a Node-to-Node rescue
6. Set up the system to wipe and rerun ootb
7. Cancel a wipe
8. Perform a deinstallation
9. Update the system for recently added hardware (admithw)
10. Check system health (checkhealth)
11. Load network configuration
134 System Deinstallation