HP ESG-D Series, Руководство пользователя

Страница: 296 / 712

5-160
Hardkey and Softkey Reference
Mode - GSM
32 1’s & 32 0’s
Press this softkey to select a binary data pattern that consists of thirty-two ones
followed by thirty-two zeroes. If you have selected
32 1’s & 32 0’s
in a pattern data
transmission, both the
Data
and the
Other Patterns
softkeys will show this
selection. In addition,
P32
(where “P” refers to Pattern and “32” refers to
thirty-two ones and thirty-two zeroes) is displayed in the
Data
field in the top line
of the text area of the display. If you have selected
32 1’s & 32 0’s
in a framed data
transmission, both the
E
and the
Other Patterns
softkeys will show this selection.
In addition,
P32
is displayed in either the
Data
field or the
E
field (encryption
bits), both of which are located near the bottom of the text area of the display. A
single output of a framed P32 data pattern consists of enough repetitions of
thirty-two ones followed by thirty-two zeroes, followed by thirty-two ones and
thirty-two zeroes, and so on, until the data fields in the timeslot are filled. If this
data pattern is selected for a timeslot with fewer than 64 bits available in the data
field, the data pattern is truncated at the point where the timeslot is filled.
Softkey Location: Press
Mode
,
GSM
,
Data
,
Other Patterns
,
32 1’s & 32 0’s
or press
Mode
,
GSM
,
Data Format Pattern Framed
,
Configure Timeslot
,
Configure Normal
,
E
,
Other Patterns
,
32 1’s & 32 0’s
32 1’s & 32 0’s
is also located in the Other Patterns Menus found in the Configure
Sync, Configure Access, and Configure Custom Menus.
SCPI Commands:
[:SOURce]:RADio:GSM:DATA P32
[:SOURce]:RADio:GSM:SLOT0|[1]|2|3|4|5|6|7:ACCess:ENCRyption P32
[:SOURce]:RADio:GSM:SLOT0|[1]|2|3|4|5|6|7:CUSTom P32
[:SOURce]:RADio:GSM:SLOT0|[1]|2|3|4|5|6|7:NORMal:ENCRyption P32
[:SOURce]:RADio:GSM:SLOT0|[1]|2|3|4|5|6|7:SYNC:ENCRyption P32