HP ESG-D Series, Руководство пользователя

Страница: 115 / 712

3-53
Troubleshooting
ESG-D Series Signal Generator Instrument-Specific Error Messages
Configuration error; Invalid option board
configuration.
This indicates that an invalid combination of option boards has
been configured. If this error has occurred as the result of a
customer-installed option, uninstall all options and then
reinstall the correct options. If the error persists, contact the
factory.
700
State Save Recall Error;Recall aborted. Unable
to recall the state from non-volatile memory.
This indicates that the state file was not readable, so the recall
was aborted. If state file exists, delete explicitly using the
memory catalog.
State Save Recall Error;Recalled state has a
bad checksum. No instrument state change.
This indicates that the state file was corrupt or out-of-date, so
the recall was ignored. If state file exists, delete explicitly using
the memory catalog.
State Save Recall Error;Recall data different
from FW revision. No instrument state change.
Indicates that an attempt was made to recall a state that was
saved with an incompatible version of the instrument firmware.
This typically occurs when a state file is copied from an
instrument with a newer version of firmware to an instrument
with an older version of firmware. Newer versions of
instrument firmware can read older state files.
State Save Recall Error;Recall non-saved state
register. Recall ignored.
Indicates that a recall was attempted for a state register that is
unused. If state file exists, delete explicitly using catalog.
State Save Recall Error;Delete sequence
<sequence_name> ignored.
Indicates that a
STATE:
file in a sequence that is being deleted
could not be deleted due to the file not being found, data
corruption, etc. If state file exists, delete explicitly using the
memory catalog.