System board
NOTE:
All system board spare part kits include replacement thermal material.
NOTE:
System board appearance may vary.
Description
System board for use in models without Windows 8.1
System board for use in models with Windows 8.1 Standard
System board for use in models with Windows 8.1 Professional
System board for use in NetClone models
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 72
).
2.
Remove the access panel (
Access panel on page 73
).
3.
Remove the baffle (
Baffle on page 101
).
4.
Rotate the drive cage to its upright position.
5.
When replacing the system board, make sure the following components are removed from the defective
system board and installed on the replacement system board:
●
Memory modules (
Memory on page 78
)
●
Expansion cards (
Expansion card on page 81
)
●
Heat sink (
Heat sink on page 109
)
●
Processor (
Processor on page 112
)
6.
Remove the baffle from the chassis (
Baffle on page 101
).
7.
Disconnect all cables connected to the system board, noting their location for reinstallation.
8.
Remove the eight Torx T15 screws that secure the system board to the chassis.
116 Chapter 5 Removal and replacement procedures – small form factor (SFF) chassis
Содержание EliteDesk 705 G1
Страница 4: ...iv Safety warning notice ...
Страница 23: ...Misc parts Microtower MT chassis spare parts 13 ...
Страница 30: ...Misc parts 20 Chapter 2 Illustrated parts catalog ...
Страница 137: ...5 Lift to remove the speaker from the computer 3 To install the speaker reverse the removal procedures Speaker 127 ...
