UNIX Linux frequently asked questions
hp learning products
http://www.hp.com/support/tape
may have a later version
data protection
drivers FAQs
windows NT
netware
unix - SCO
unix - linux
frequently asked questions
"How do I know what disk drivers I am using at the moment, and what
drivers do I need for running tape backups?"
contents of this section
related topics
generic kernels
compiling a new kernel
back to list of questions
next question
This topic is available in English only
generic kernels
You do not need to worry about which disk drivers you are currently using;
providing the right SCSI transport driver is present then it can be used by the tape
driver. If you use a generic kernel (that is if you have not trimmed the hardware
device support out of the kernel you installed from, say, RedHat 5.2) then it will
include support for all popular SCSI HBAs.
Check
"http://www.linux.org"
about support for your particular hardware – all
popular Adaptec 78xx and 77xx chipsets along with Symbios 53cXXX derivatives
are currently supported.
compiling a new kernel
If your kernel does not include the relevant SCSI drivers then you should compile
a new kernel by downloading the kernel source tarball. Once downloaded, a new
kernal can be compiled by following the instructions in your release
documentation.
If you installed the kernel sources then they are usually present within the path
"/usr/src/linux". This path name can be a symbolic link to the actual release
directory (for example "linux-2.0.34").
In order to have SCSI tape support you need to have SCSI support compiled in,
and SCSI tape support compiled in.
next question
Go to the next question
"How do I configure a tape drive?"
© 1999-2001, Hewlett-Packard Company
file:///C|/Documents%20and%20Settings/topher.COL-SPRINGS/Desktop/dltvs80%20manual/document/common/drivers_faqs/eng/ul_q1.htm [11/29/2001 8:34:48 AM]