26 Chapter 3 - Setup, installation, and authentication
ENWW
Use the following steps to install the jar files through the
embedded Web server:
1
Find the IP address of the printer by using one of these methods:
Ping the printer name on the MS-DOS® command screen.
-OR-
Print the Configuration page (click Menu, click Information, and
then click Print Configuration).
2
Go to the following address on the Web browser:
http://<PrinterIPAddress>/hp/device/this.loader
3
Type the URL for the hp_laserjet_dynamicmenus_30a_x.jar in
the Package URL and then click Install Package.
4
Review the Confirmation page to make sure that the package is
installed correctly.
Note
After a MFP Chai jar file has been loaded, an error message might
appear, indicating that the amount of memory on the MFP is insufficient.
Make sure that the memory that is configured for the MFP meets the
recommended values. Restart the MFP between each MFP Chai jar
file installation to clear this message.
5
Type the URL for the hp_laserjet_dssauth_30a.jar in the
Package URL and click Install Package.
6
Review the Confirmation page to make sure that the file is
installed correctly.
7
Type the URL for the s_hp_dssworkflow_4100_9000_x.jar in
the Package URL, and then click Install Package.
8
Review the Confirmation page to make sure that the file is
installed correctly.
Содержание digital sending software v 3.0 workflow
