HP Compaq Presario,Presario 2140, Руководство пользователя

Страница: 220 / 244

Information and Error Messages
220 Director Product Manager User Guide
Invalid network
address.
The IP address
specified for the
product is unknown to
the domain name
server (invalid).
Verify and enter a valid product
IP address.
Invalid port address. Invalid port address
has been entered.
Verify port address through the
Configure Addresses - “Active”
dialog box (FICON
management style only) and
re-enter.
Invalid port number. The port number must
be within a range of
ports for the specific
director model
Enter a port number within the
correct range.
Invalid port number.
Valid ports are (0-63).
Director 2/64 only.
The Fibre Channel
number entered is
invalid. The port
number must be an
integer from 0 through
63 inclusive.
Verify and enter a valid port
number.
Invalid port number.
Valid ports are (0-127,
132-143).
Director 2/140 only.
Port number must be
within the range of
ports for the specific
director model. For this
model, the valid port
numbers are 0-127
and 132-143. Ports
128-131 are not valid
because they are
internal ports and
cannot be connected
to external fiber optic
cables.
Enter a port number within the
correct range.
Invalid port swap. Port swap selection is
not allowed.
Ensure that each port selected
for swap has not been
previously swapped.
Invalid response
received from director.
An error occurred at
the director during a
firmware download
operation.
Retry the firmware download
operation. If the problem
persists, contact the next level of
support.
Table 9: Product Manager Messages (Continued)
Message Description Action