HP Compaq Presario,Presario 2140, Руководство пользователя

Страница: 134 / 244

Configuring the Director
134 Director Product Manager User Guide
Ports are numbered from 0-63 on the Director 2/64, and 0-127 and 132-143 on
the Director 2/140. Note that for the Director 2/140, ports 128-131 are internal
ports and not available for external connections.
2. Type a name that reflects the end device connected through the port in the
Name field. For example, use
XYZ Server
, where
XYZ
is the brand name
of the server.
3. Block or unblock operation for a port when you click the check box in the
Blocked column. When a check mark displays, the port is blocked.
4. Enable or disable extended distance buffering for the port when you click the
check box in the 10-100 km column. When a check mark displays, extended
distance buffering is enabled.
5. Enable or disable LIN alerts for the port when you click the check box in the
LIN Alerts column. When a check mark displays, LIN alerts are enabled.
Note: The factory default for LIN alerts is enabled.
6. Choose a port type when you click in the Type field and selecting from the
list.
7. Prevent an unspecified device from being connected to the port when you
click the check box in the Port Binding column.
8. To set the data speed for the port, click in the Speed column for the port, and
choose 1 Gb/sec, 2 Gb/sec, or Negotiate. When you choose Negotiate, it
allows the port and attached device to negotiate the data rate.
Note: Your director model, firmware, and port card may not allow 2 Gb/sec
data speeds.
9. Click the Bound WWN field, and type the WWN or nickname of the specific
device to be connected to the port.
10. Use the scroll bar on the right side of the Configure Ports dialog box table to
display additional ports that you want to configure.
11. Click Activate to activate the changes and close the dialog box.