HP Compaq Presario,Presario 2140, Руководство пользователя

Страница: 151 / 244

Configuring the Director
151 Director Product Manager User Guide
7. Enter the amount of cumulative minutes in which the % utilization should
exist during the notification interval before an alert is generated. You can also
choose At any time if you want an alert to occur whenever the set %
utilization is reached. The valid range is from 1 to the interval value set in
step 8 .
8. Enter the interval in minutes in which throughput is measured and threshold
notifications can occur. The valid range is 5 minutes to 70,560 minutes.
9. Click Next. A new screen displays for selecting ports for the alerts, as shown
in Figure 48 .
Figure 48: New Threshold Alerts dialog box—third screen
10. Choose either Port Type or Port List.
■
For Port Type, choose either E_Ports or F_Ports will cause this alert to
generate for all ports configured as E_Ports or F_Ports respectively.
■
For Port List, you can choose individual ports when you click the check
box by each port number or set all ports. Choosing Set All Ports places a
check mark by each port number. Choosing Clear All Ports will clear the
check marks by each port number.
11. Click Next. A final screen displays to provide a summary of your alert
configuration, as shown in Figure 49 .