HP C7745NB - SureStore DLT Tape Autoloader 1/9, Руководство по обслуживанию

Страница: 33 / 153

Chapter 1 Verifying the Host Configuration 33
Ch
ap
ter
1
HP-UX and MPE/iX
For more information on configuring these operating systems and verifying the
connection, see the online configuration and diagnostic guide at
www.hp.com/go/support. Search for the library model and then select
[Manuals] .
You can also check that the autoloader is installed correctly by looking for the
autoloader and drive devices after powering up the host (see Setting SCSI IDs
on page 62 for the autoloader’s default SCSI IDs).
■
If you are using a Windows NT system, you can see if the autoloader is
recognized by going into Settings -> Control Panel -> SCSI Adapter
and expanding the device tree to view the autoloader’s SCSI adapter.
■
If you are using HP-UX, run an
ioscan
as root.
■
For Sun Solaris:
1. Close all open applications and exit the Common Desktop Environment
(CDE).
2. Type [init 0] at any prompt. This will shut down all processes, and take you
to the OpenBoot PROM .
3. Type [reset] .
4. At the OK prompt, type [probe-scsi-all] .