HP C7745NB - SureStore DLT Tape Autoloader 1/9, Руководство по обслуживанию

Страница: 19 / 153

Chapter 1 Choosing a Location 19
Ch
ap
ter
1
Choosing a Location
Choose a location that meets the following criteria.
Table 3
Location Criteria
Weight 23 kg (50 lbs)
Room
temperature
10-35º C (50-95º F)
Power
source
AC power voltage: 100-127 V or 200-240 V
Line frequency: 50-60 Hz
Note Locate the AC outlet near the autoloader. The AC
power cord is this product’s main AC disconnect
device and must be easily accessible at all times.
Air quality Minimal sources of particulate contamination. Avoid areas near
frequently used doors and walkways, stacks of supplies that collect
dust, and smoke-filled rooms.
Caution Excessive dust and debris can damage tapes and
tape drives.
Humidity 20-80% RH
Clearance Standalone configuration — includes the cosmetic enclosure and
feet (see Installing a Standalone Autoloader in a Rack on
page 20):
Back 56 cm (22 inches) for cooling and service.
Front 86 cm (34 inches) for operator access.
Rackmounted configuration (see Rackmounting the Autoloader
on page 22)
Above Requires 6 EIA (26.67 cm or 10.5 inches) of
clearance in a rack.
Back Allow adequate room for service access, at least 61
cm (24 inches).
Front Requires 86 cm (34 inches) for tape access.