HP AK373A - StorageWorks All-in-One Storage System 1200r 5.4TB SAS Model NAS Server, Руководство пользователя

Страница: 66 / 216

NOTE:
Any existing iSCSI connections must be reset before changes take effect.
Resetting iSCSI connections
If you use the
Storage Networks
dialog box to configure a preferred private storage network for iSCSI
traffic and there are one or more existing iSCSI connections on the system, the new setting will not
take effect until the existing connections are reset through iSCSI Initiator on the connected systems.
To reset an iSCSI connection:
1.
On the system that contains the iSCSI initiator whose connection has been changed, open
Microsoft iSCSI Initiator.
2.
On the
Persistent Targets
tab, select the iSCSI target that resides on your AiO Storage System
and then click
Remove
.
3.
On the
Targets
tab, select the iSCSI target that resides on your AiO Storage System and then
click
Details
.
4.
Select the target identifier from the list, click
Log off
, and then click
OK
.
5.
On the
Discovery
tab, under
Target Portals
select the IP address that was previously designated
for iSCSI traffic between the application server and the All-in-One Storage System and click
Remove
.
6.
Click
Add
. In the
IP address or DNS name
field, type the IP address that was enabled for iSCSI
traffic in the All-in-One
Storage Networks
dialog box and then click
OK
.
7.
On the
Targets
tab, click
Log On
.
8.
Check the
Automatically restore this connection when the system boots
check box and then click
OK
.
9.
Click
OK
to close the
iSCSI Initiator Properties
dialog box.
All-in-One Storage Manager 66