HP AK373A - StorageWorks All-in-One Storage System 1200r 5.4TB SAS Model NAS Server, Руководство пользователя

Страница: 28 / 216

Using remote management methods
HP StorageWorks All-in-One Storage Systems provide remote management functionality through HP
ProLiant Lights-Out technologies. The AiO400r and AiO1200r Storage Systems include a Lights-Out
100 (LO100) port with Advanced features. The AiO600 Storage System includes an Integrated
Lights-Out 2 (iLO 2) port with Advanced features.
The AiO400t Storage System does not include embedded Lights-Out 100 remote management support.
This system requires the purchase and installation of the Lights-Out 100c Remote Management Card
in order to use Lights-Out 100 remote management features. For more information about the Lights-Out
100c Remote Management Card, see
http://h18004.www1.hp.com/products/servers/management/
remotemgmt/lightsout100/index.html .
For more information about HP ProLiant Lights-Out technologies, see http://h18013.www1.hp.com/
products/servers/management/remotemgmt.html .
Using the Lights-Out 100 method
HP Lights-Out 100 allows you to remotely manage HP All-in-One Storage Systems remotely over an
Ethernet connection. It provides embedded KVM over IP for full remote graphical console capabilities.
This complements the virtual media and power control for complete entry level Lights-Out remote
management. LO100 also enables anytime access to system management information such as hardware
health and event logs.
For more information on using HP LO100, see the HP ProLiant Lights-Out 100 Remote Management
User Guide .
To quickly set up LO100 using the default settings for LO100 Advanced features on AiO400r, AiO400t,
and AiO1200r Storage Systems, follow these steps:
1. Ensure that a network cable is connected to the LO100 port located on the back of the storage
system.
NOTE:
This connection method is easiest when the connection is to a DHCP and DNS supported
network.
2. If you are using DHCP (IP addressing), you will need to input a static IP address by using the
direct attach method and the IPMI section of the BIOS to read the DHCP address. If you are not
using DHCP, use this procedure to set a static IP address.
3. Using the methods described in the HP ProLiant Lights-Out 100 Remote Management User Guide ,
connect to the LO100 port.
IMPORTANT:
Log on using the default LO100 user name
admin
and password
admin
.
4. If desired, you can change the default user name and password on the administrator account to
your predefined selections.
5. Set up your user accounts, if using the local accounts feature.
6. Ensure that LO100 advanced features are activated. If they are not, activate these features by
entering a license key from the included
HP ProLiant Essentials Lights-Out 100i Advanced Pack .
Installing and configuring the server 28