HP 9000 rp7410 Скачать руководство пользователя страница 98

Страница: 98 / 266

Table 5-1 nPartition Boot and Reset Task Summaries

(continued)

Summary

Task

• Service Processor (MP or GSP):

command; under normal operation you first shut

down the operating system.

On HP Integrity servers you should reset an nPartition only after all self tests and
partition rendezvous have completed.

• BCH Menu:

REBOOT

command.

• EFI Boot Manager:

Boot Option Maintenance

→

Cold Reset

• EFI Shell:

reset

command.

• HP-UX:

/sbin/shutdown

/usr/sbin/reboot

command.

• OpenVMS:

@SYS$SYSTEM:SHUTDOWN

command and enter

Yes

at the "Should an

automatic system reboot be performed" prompt.

• Windows:

shutdown /r

command or the

Start

→

Shut Down

action and

Restart

pull-down menu option.

• Linux:

/sbin/shutdown

command. You must include the required time argument

to specify when the shutdown is to occur.

See

“Rebooting and Resetting nPartitions” (page 135)

“Rebooting and Resetting
nPartitions”

•

NOTE:

Only supported for cell-based HP servers.

• HP-UX:

/sbin/shutdown -R

command.

• OpenVMS:

@SYS$SYSTEM:SHUTDOWN

command and enter

Yes

at the "Should an

automatic system reboot be performed" prompt.

• Windows:

shutdown /r

command or the

Start

→

Shut Down

action and

Restart

pull-down menu option.

• Linux:

/sbin/shutdown -r

time command. You must include the time argument

to specify when the shutdown is to occur.

See

“Performing a Reboot for Reconfig” (page 139)

“Performing a Reboot for
Reconfig”

•

NOTE:

Only supported for cell-based HP servers.

• Service Processor (MP or GSP):

command; under normal operation you first shut

down the operating system.

• BCH Menu:

RECONFIGRESET

command.

• EFI Shell:

reconfigreset

command.

• HP-UX:

/sbin/shutdown -R -H

command.

• OpenVMS:

@SYS$SYSTEM:SHUTDOWN

command and enter

at the "Should an

automatic system reboot be performed" prompt, then at the service processor (MP or
GSP) Command menu enter the

command and specify the nPartition.

• Windows:

shutdown /s

command or the

Start

→

Shut Down

action and

Shut down

pull-down menu option.

• Linux:

/sbin/shutdown -h

time command. You must include the time argument

to specify when the shutdown is to occur.

See

“Shutting Down to a Shutdown for Reconfig (Inactive) State” (page 141)

“Shutting Down to a
Shutdown for Reconfig
(Inactive) State”

•

NOTE:

Only supported for cell-based HP servers.

• Service Processor (MP or GSP):

command.

• HP-UX: specify the

-B

option when using the

/usr/sbin/parmodify

command to

reconfigure an inactive nPartition.

See

“Booting an Inactive nPartition” (page 146)

“Booting an Inactive
nPartition”

• BCH Menu:

BOOT LAN...

command.

• EFI Boot Manager: select

Boot Option Maintenance

→

Boot from a File

and select

the "Load File" option for the LAN card that has the desired MAC address.

• EFI Shell:

lanboot select

command.

See

“Booting over a Network” (page 147)

“Booting over a
Network”

Booting and Resetting nPartitions

Содержание 9000 rp7410











































































































































































































































































Результаты поиска

Содержание 9000 rp7410

Отзывы:

HP 9000 rp7410, Руководство администратора, Страница: 98 / 266

Результаты поиска

Содержание 9000 rp7410

Отзывы: