HP 85640A, Руководство по эксплуатации и обслуживанию

Страница: 167 / 169

M
major assembly and cable locations, 6-2{4
maximum leveled output power performance
test, 4-9
mechanical replaceable parts, 6-4{6
N
non-harmonic spurious outputs performance
test, 4-19
O
operation
front-panel features, 3-2
rear panel features, 3-4
reection measurement example , HP
8560A/E, HP 8561B/E, HP 8563A/E,
3-30
reection measurement example , HP
8561A, HP 8562A/B, 3-37
setting .5 V/GHz rear panel output, 3-6
tracking generator and host spectrum
analyzer connections, 3-5
transmission measurement example , HP
8560A/E, HP 8561B/E, HP 8563A/E,
3-9
transmission measurement example , HP
8561A, HP 8562A/B, 3-21
output attenuator accuracy performance
test, 4-6
output level knob, 3-2
P
packaging, 2-2, 7-4
performance tests
frequency tracking range, 4-31
harmonic spurious outputs, 4-16
host spectrum analyzers, 4-1
level atness, 4-12
LO feedthrough amplitude, 4-24
maximum leveled output power, 4-9
non-harmonic spurious outputs, 4-19
output attenuator accuracy, 4-6
preparing the host spectrum analyzer, 4-3
preparing the tracking generator, 4-3
recommended test equipment list, 4-3
recording test results, 4-3
test equipment required, 4-3
test list table, 4-1
tracking generator feedthrough, 4-27
power requirements, 2-3{6
line fuse, 2-5
line voltage range, 2-3
line-voltage selection, 2-4
power cables, 2-5
R
rear panel features, 3-4
rear panel interconnections, 3-4
rear panel sweep output, 4-3
reference trace, 3-15, 3-26
reection measurement example
HP 8560A/E, HP 8561B/E, HP 8563A/E,
3-30
HP 8561A, HP 8562A/B, 3-37
\savelock on" error, 3-35 , 3-40
store open/short average reference, 3-32
replacement procedures, 7-6{17
A5 line lter/switch assembly replacement,
7-16
replacing A1 attenuator, 7-8
replacing A2 tracking generator, 7-10
replacing A3 interface board assembly,
7-12
replacing A4 power supply, 7-14
replacing the instrument cover, 7-7
RF output, 3-2
S
sales and service, 2-9
service information, 2-9
A1 attenuator circuit description, 7-21
A2 tracking generator circuit description,
7-21
A3 interface assembly circuit description,
7-22
A4 power supply circuit description, 7-23
A5 line lter/switch assembly circuit
description, 7-23
A5 line lter/switch assembly replacement,
7-16
electrostatic discharge, 7-2
excessive FM, 7-26
atness out of tolerance, 7-27
output unleveled, 7-24
rebuilt-exchange assemblies, 7-6
replacement procedures, 7-6
replacing A1 attenuator, 7-8
replacing A2 tracking generator, 7-10
replacing A3 interface board assembly,
7-12
replacing A4 power supply, 7-14
replacing the instrument cover, 7-7
returning the instrument for service, 7-4
spectrum analyzer to tracking generator
system block diagram, 7-20
tracking generator block diagram, 7-20
tracking generator circuit description, 7-18
tracking generator circuit troubleshooting,
7-18
troubleshooting, 7-24
Index-2 HP 85640A RF T racking Generator Operation and Service Manual