HP 8511A Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 69

HP 8511A Скачать руководство пользователя страница 24

HP 8511A Test Set Operating and Service Manual

1-9

General Information

Service and Support Options

Service and Support Options

Option W03

Warranty Conversion

Option W03 converts the standard one year return to Hewlett-Packard
warranty to a 90 day on-site warranty. W03 can only be ordered at the time
of instrument purchase. Instruments ordered with option WOS are identified
on the serial number label, or on a special identification label supplied with
the instrument.

Option W30

Extended Service (Return)

Option W30 adds two additional years of return-to-HP service, to follow the
first year of warranty. Option W30 can be ordered only at the time of sale.
Instruments ordered with option W30 are identified on the serial number
label, or on a special identification label supplied with the instrument.

Option W31

Extended Service (On-Site)

Option W30 adds two additional years of on-site repair coverage, to follow
the first year of warranty. Option W31 can be ordered only at the time of
sale.

Option 1BN

Certificate of Calibration

Option 1BN adds MIL-STD 45662A Certificate of Calibration to the
instrument. This option must be ordered when the instrument is ordered.

Option 1BP

Certificate of Calibration (With Data)

Option 1BP adds a MIL-STD 45662A certificate of Calibration and the
corresponding calibration data to the instrument. This option must be
ordered when the instrument is ordered.

NOTE

Additional system warranty information is included in the
HP 8510 manual set.

«
...
22
23
24
25
26
...
»

Содержание 8511A






































































Отзывы:

Нет отзывов