HP 70908A, Руководство по обслуживанию

Страница: 119 / 335

Recommended T est Equipment (continued)
Specialized T est Equipment
Tune + Span ET .
Oset-Coil-Current ET .
Standard Equipment
HP 11667B power splitter
HP 0955-0204 microwave isolator
HP 85027B directional bridge
HP 85027-60004 calibrated open/short
HP 8493C Option 006 coaxial xed attenuator
HP 908A 50 N(m) termination
HP 5022-1150 2nd converter test cover
A ccessory Equipment
HP 54503A digitizing oscilloscope
HP 87421A power supply
Cables
HP 8120-4921 91 cm 50 APC-3.5 mm(m) to APC-3.5 mm(m) (2 required)
HP 10503A 122 cm (48 in) 50 coax UG-88C/U BNC(m) to BNC(m) (4 required)
HP 85680-60093 123 cm (48.4 in) 50 BNC(m) to SMB(f) (2 required)
HP 5021-5450 260 mm SMA(m) to SMA(m)
HP 5061-9038 520 mm SMA(m) to SMA(m)
HP 5061-5458 1.0 meter SMA(m) to SMA(m)
HP 8120-5014 100 mm SMB(f) to SMB(f)
HP 8120-5016 160 mm SMB(f) to SMB(f) (2 required)
HP 10833D 0.5 meter HP-IB cable
A dapters
HP 5061-5311 50 APC-3.5(f) to APC-3.5(f) (2 required)
HP 85027-60002 50 APC 3.5(f) to APC 3.5(m) (2 required)
HP 1250-1744 50 APC-3.5(f) to N(m) (2 required)
HP 1250-1743 50 APC-3.5(m) to N(m)
HP 1250-1748 50 APC-3.5(m) to APC-3.5(m) (2 required)
HP 1250-1292 50 BNC(f) to alligator clips
HP 1251-2277 50 BNC(f) to dual banana plug
HP 1250-0780 50 N(m) to BNC(f) (2 required)
HP 1250-1250 50 N(m) to SMA(f)
HP 1250-1158 50 SMA(f) to SMA(f)
HP 1250-1200 50 SMA(m) to BNC(f)
HP 1250-1159 50 SMA(m) to SMA(m) (2 required)
HP 1250-1397 50 right angle SMA(m) to SMA(m)
HP 1250-1236 50 SMB(f) to BNC(f) (2 required)
HP 1250-0672 50 SMB(f) to SMB(f) (2 required)
HP 1250-0674 50 SMB(m) to SMA(f) (2 required)
HP 70000 system service kit HP 71000-60002
1
HP 70001-60013 extender module
HP 70001-00038 right modied mainframe cover
HP 70001-00039 left modied mainframe cover
HP 5021-6773 cable puller
HP 8710-1651 short 8 mm hex-ball driver
HP 8710-1728 bandpass lter tuning tool
HP 85680-60093 123 cm (48.4 in) 50 BNC(m) to SMB(f) (three)
HP 5061-9021 390 mm SMB(f) to SMB(f) (seven)
HP 8160-0495 chromeric gasket (two feet)
HP 5021-7445 connector pin straightener
A ccessory Service T ools
HP 8710-0033 nonmetallic tuning tool
HP 8710-1791 ceramic adjustment tool
HP 08555-20097 5/16 inch modied box wrench
1 This kit includes servicing tools used to repair all HP 70000 Series modular measurement system modules and
a modication procedure for the HP 70001A mainframe which allows access to modules during bench testing
and repair .
5-2 Recommended T est Equipment T ables