HP 70908A, Руководство по обслуживанию

Страница: 32 / 335

Module V erication Software Overview
T esting Multiple Modules
Module V erication Software tests only one module at a time . If you have more than one
module to test in your system, test them separately . If you have tested a module and want to
change the module being tested without turning o the controller , follow the steps below .
1.
Return to the Main Menu, then press
N NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
equipment menu .
2. In the Equipment Menu edit screen, move the item indicator to the Device Model number
column next to the DUT .
3. Press
NNNNNNNNNNNNNNNNNNNN
SELECT , modify the model number , and press 4 ENTER 5 .
4.
Press
N NNNNNNNNNNNNN
DONE , then
N NNNNNNNNNNNNNNNNNNNNNNNNNNNN
main menu .
5.
From the Main Menu, press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
test menu . If ERROR MESSAGE: Selected instrument
under test is ____; but the software supports the ____ module appears , press either
NNNNNNNNNNNNNNNNNNNN
RELOAD and follow the on-screen prompts to load test software , or
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
CHANGE DUT to gain
access to the Equipment Menu or HP-MSIB A ddress Menu. From the Equipment Menu, you
can select the module under test's model number and modify it to the module number of
the software now loaded. From the HP-MSIB A ddress Menu, select the module to test that
matches the software you already have loaded. Otherwise , press
NNNNNNNNNNNNNNNNN
ABORT .
Error Messages or W arnings Dened
There are three kinds of error messages or warnings generated by the program.
One appears briey at the bottom of the CRT display . The program then goes automatically
to a menu that asks you for corrections or modications .
Another type of error message begins with ERROR MESSAGE and provides special softkeys .
These errors are user-correctable and anticipated by the program. There is usually a
Possible Fix message displayed to help you clear the problem.
The nal type begins with ERROR and provides no special softkeys . The message informs you
of an unanticipated error . There is no suggested x displayed. If you cannot recover from
one of these errors , please contact your Hewlett-P ackard Sales and Service Oce .
Final T ests Dened
T ests dened as Final T ests are a subset of all available verication tests for a given module .
After any module-level adjustment or repair , run Final T ests . Once a module has passed
the Final T ests , install it into any mainframe and expect performance within its specied
characteristics . P erform tests classied as A dditional T ests after troubleshooting or adjustments
to be sure of the proper operation of specic assemblies . The
N
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
FINAL TEST softkey has no
dened purpose while performing adjustments .
Module V erication Software 2-7