HP 669048-009 Скачать руководство пользователя страница 57

Страница: 57 / 108

Ground Bonding kit 57

Installing the ground bonding rack option kit on fan

kits

From the grounding lug on the rack top to the grounding lug on the fan kit:

Place one end of a 15.24-cm (6-inch) grounding strap over the grounding lug on the rack top.

Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the rack top,
and then tighten the washer.

Place the other end of the same grounding strap over the grounding lug on the perforated panel.

Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the perforated
panel, and then tighten the washer.

From the grounding lug on the fan kit to the grounding lug on the egress slot:

Place one end of a 36.83-cm (14.5-inch) grounding strap over the grounding lug on the fan kit.

Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the fan kit, and
then tighten the washer.

Place the other end of the same grounding strap over the grounding lug on the egress slot.

Содержание 669048-009













































































































Результаты поиска

Содержание 669048-009

Отзывы:

Похожие инструкции для 669048-009

Бренды по названию

Популярные бренды

HP 669048-009, Руководство по установке

Результаты поиска

Содержание 669048-009

Отзывы:

Похожие инструкции для 669048-009

Бренды по названию

Популярные бренды