HP 669048-009 Скачать руководство пользователя страница 53

Страница: 53 / 108

Ground Bonding kit 53

Place the other end of the same grounding strap over the grounding lug on the rack top.

Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the rack top,
and then tighten the washer.

From the grounding lug on the rack top to the grounding lug on the perforated panel:

Place one end of a 36.83-cm (14.5-inch) grounding strap over the grounding lug on the rack top.

Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the rack top,
and then tighten the washer.

Place the other end of the same grounding strap over the grounding lug on the perforated panel.

Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the perforated
panel, and then tighten the washer.

From the grounding lug on the perforated panel or fan kit to the grounding lug on the egress slot:

Place one end of a 15.24-cm (6-inch) grounding strap over the grounding lug on the perforated panel
or fan kit.

Содержание 669048-009













































































































Результаты поиска

Содержание 669048-009

Отзывы:

Похожие инструкции для 669048-009

Бренды по названию

Популярные бренды

HP 669048-009, Руководство по установке

Результаты поиска

Содержание 669048-009

Отзывы:

Похожие инструкции для 669048-009

Бренды по названию

Популярные бренды