Removal and replacement procedures
Maintenance and Service Guide
4–37
3. Turn the computer right-side up, with the front toward you.
4. Disconnect the power connector cables
1
from the system board.
5. Release the power connector cables from the clips
2
and routing channel built into the top cover.
6. Disconnect the network cable
3
from the system board.
7. Release the network cable from the clips
4
and routing channel built into the top cover.
8. Remove the five slotted Torx T8M2.5×7.0 screws
1
and the Torx T8M2.5×6.0 screw
2
that secure the top
cover to the base enclosure.