Computer Setup
Maintenance and Service Guide
5–5
Diagnostics menu
System Configuration menu
✎
Some of the listed System Configuration options may not be supported by your computer.
Select
To do this
System Diagnostics Menu
■
System Information—Displays the following information:
❐
Identification information for the computer and
the batteries in the system.
❐
Specification information for the processor, cache and
memory size, system ROM, video revision, and
keyboard controller version.
■
Start-up Test—Verifies the system components needed for
starting the computer.
■
Run-In Test—Runs a comprehensive check on
system memory.
■
Hard Disk Test—Runs a comprehensive self-test on any
hard drive in the system.
Select
To do this
Language
Change the Computer Setup language.
Boot Options
■
Set a Startup Menu delay (in seconds).
■
Enable/disable Custom Logo (disabled by default).
■
Enable/disable CD-ROM boot (enabled by default).
■
Enable/disable SD Card boot (enabled by default).
■
Enable/disable floppy boot (enabled by default).
■
Enable/disable PXE Internal NIC boot (enabled by default).
■
Set the Express Boot Popup delay in seconds.
■
Set the boot order.
Device Configurations
■
Enable/disable USB legacy support (enabled by default).
When enabled, USB legacy support allows the following:
❐
Use of a USB keyboard in Computer Setup even when
a Windows operating system is not running.
❐
Startup from bootable USB devices, including
a hard drive, diskette drive, or optical drive connected by
a USB port to the computer.
■
Enable/disable fan always on while connected to an
AC outlet (enabled by default).
■
Enable/disable Data Execution Prevention. When enabled,
the processor can disable some virus code execution,
which helps to improve computer security (enabled
by default).
(Continued)