4–10
Maintenance and Service Guide
Removal and replacement procedures
Remove the hard drive:
1. Position the computer with the front toward you.
2. Loosen the two Phillips PM2.0×6.0 captive screws
1
that secure the hard drive cover to the computer.
3. Lift the left side
2
of the hard drive cover to detach it from the computer.
4. Remove the hard drive cover
3
. The hard drive cover is included in the Plastics Kit, spare part number
577211-001.
5. Loosen the Phillips PM2.5×11.0 captive screw
1
that secures the hard drive to the computer.
6. Grasp the Mylar tab
2
in the hard drive bay, and then lift it up to disconnect the hard drive from the
system board.
7. Grasp the Mylar tab
3
on the hard drive, and then remove the hard drive
4
from the hard drive bay.