manualshive.com logo in svg

HP 17-x Series, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP 17-x Series Скачать руководство пользователя страница 76

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

4.

Remove the battery (see 

Battery on page 32

).

5.

Remove the optical drive (see 

Optical drive on page 33

).

6.

Remove the bottom cover (see 

Bottom cover on page 39

).

7.

Remove the fan/heat sink (see 

Fan/heat sink assembly on page 56

).

To remove the display assembly:

1.

Position the computer with the display open and hanging down off the edge of a table.

2.

Disconnect the display cable from the system board (1).

3.

Disconnect the wireless antenna cables from the WLAN module (2).

4.

Remove the two Phillips PM2.5×7.0 screws (3) that secure the display assembly to the computer.

5.

Remove the three Phillips broadhead PM2.0×2.0 screws (4) that secure the display assembly to the 
computer.

6.

Open the display to rotate the hinges upward to an angle (5).

68

Chapter 6   Removal and replacement procedures for Authorized Service Provider parts

Содержание 17-x Series

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды