manualshive.com logo in svg

HP 1650B, Руководство программиста, Страница: 82 / 346

Поделиться
Скачать
HP 1650B Скачать руководство пользователя страница 82

DATA

Section Header

The section header uses bytes 1 through 16 (this manual begins counting

Description

at 1; there is no byte 0). The 16 bytes of the section header are as follows:

1

10 bytes   section name, such as 

 (six trailing spaces)

11

1 byte   reserved

12

1 bytes   module ID (31 for HP 

13

4 bytes   length (always 14506 for HP 

Section Data

For the SYSTem:DATA command, the   section data   parameter
consists of two parts: the data preamble and the acquisition data. These
are described in the following two sections.

Data Preamble

The block data is organized as 160 bytes of preamble information,

Description

followed by 1024 

 groups of information, followed by 10 reserved

bytes. The preamble gives information for each analyzer describing the

amount and type of data captured, where the trace point occurred in the

data, which pods are assigned to which analyzer, and other information.

Each 

 group is made up of 

 bytes (16 bits) of status for

Analyzer 1, two bytes of status for Analyzer 2, then five sets of two bytes of
information for each of the five 16-bit pods of the HP 16510B.

Note 

One analyzer’s information is independent of the other
analyzer’s information. In other words, on any given fine, one analyzer may
contain data information for a timing machine, while the other analyzer
may contain count information for a state machine with time tags enabled.
The status bytes for each analyzer describe what the information for that
line contains. Therefore, when describing the different formats that data
may contain below, keep in mind that this format pertains 

 to those

pods that are assigned to the analyzer of the specified type. The other
analyzer’s data is TOTALLY independent and conforms to its own format.

System Commands

HP 

 1651B

Programming Reference

Содержание 1650B



























































































































































































































































































































































Отзывы:

Нет отзывов