HP 1650B Скачать руководство пользователя страница 30

Страница: 30 / 346

Note

A command or query may be sent in either

or shortform, or in

any combination of iongform and shortform. The HEADER and

commands only control the format of the returned data

and have no effect on the way commands are sent.

Refer to the chapter “System Commands” for information on turning the
HEADER and

commands on and off.

Response Data

Both numbers and strings are returned as a series of ASCII characters, as

Formats

described in the following sections. Keywords in the data are returned in
the same format as the header, as specified by the

command.

Like the headers, the keywords will always be in upper-case.

The following are possible responses to the

TFORMAT:

LAB? ‘ADDR’ query.

terminator> (Header on;

on)

(Header on;

off)

(Header off;

on)

(Header off;

off)

to the individual commands in this manual for information on the

(alpha or numeric) of the data returned from each query.

introduction to Programming an Instrument

1-14

Programming Reference

Содержание 1650B



























































































































































































































































































































































Результаты поиска

Содержание 1650B

Отзывы:

HP 1650B, Руководство программиста, Страница: 30 / 346

Результаты поиска

Содержание 1650B

Отзывы: